M240l Machine Gun - The M240 is a common Belgian-American rifle. Based on the FN MAG, the M240 is currently the standard service GPMG for the United States Army.
The M60E4 (designated Mk 43 by the US Navy) competed in Army trials in the 1990s against the M240E4 (as then designated) in a competition to replace the decades-old M60 era for a new general purpose machine gun. The M240E4 won, and was classified as the M240B. This resulted in 1000 existing M240s being sent to FN for repairs and a special kit that modified them for ground use (such as stock, rail, etc.). This led to purchase contracts for the new M240B in the late 1990s. However, a new feature has been added, a hydraulic buffer system that reduces felt recoil as it was integrated into the previous M60. Although the M240B proved more reliable in testing, it was several pounds heavier than the M60E4, and a program for a lighter weight general purpose machine gun has been underway since the early 2000s. Army M240s converted to M240B configuration should not be confused with the Marine Corps' large number of M240D converted to M240G configuration.
M240l Machine Gun
The M240 family of weapons are gas-operated, belt-fed, air-cooled weapons. Infantry M240s (M240B for the US Army and M240G for the US Marine Corps) are equipped with a pistol grip and trigger, and wooden (earlier models) or polymer (now made) stocks. Coaxial ones (like the M240C) have the trigger replaced by an electric solenoid, and pintle-mounted versions (like the M240D) have spade handles instead of pistol grips and stocks.
Soldiers Complete Weapons Qualification For M2 And M240 Machine Guns At Fort Mccoy, Wi
The M240 uses a long stroke gas piston system with the gas regulator located under the barrel. The bolt is locked using a swinging shoulder that catches the bottom of the receiver.
It is fed using disintegrating steel belts of various lengths. The rate of fire could be set between low (650 rounds per minute) and high (950 rounds per minute) by adjusting the gas regulator and return spring assembly. As is common with machine guns, the M240 can only be fired in full automatic.
The receiver is made of stamped steel, and the charging handle is located on the right side of the receiver. There are two mounting points on the bottom of the receiver to fit a variety of mounts, such as tripods and car or boat mounts.
The air-cooled barrel is quickly removed, and it has a carry handle attached to help with carrying the hot nozzle. The folding bipod is attached to the gas block.
Usmc M240b Machine Gun
The M240 typically uses metal sights, where the rear is adjustable for 100 meters of range and the front is adjustable for windage. Most production variants have a Picatinny style optic to mount on the top of the receiver.
Use of the weapon requires slightly different steps from other military small arms due to the open bolt nature of the weapon. "Half load" is accomplished by ensuring the weapon is clear, then by advancing the bolt and placing the ammo belt in the feed tray and closing the top cover. A "full load" is required when the weapon is ready to fire by using the rear charging handle and bringing it forward (done differently for newer ones with a spring for the car variety). goes). The weapon is then vaulted or pointed at a target in preparation for firing. Great care must be taken to ensure that the bolt position is properly locked whether rearward or forward. If the bolt is not secured and allowed to move forward with ammunition in the feed tray, the weapon will fire regardless of the safety setting or whether the trigger is pulled.
The weapon is cleared by ensuring the bolt is locked to the rear and the weapon is in the safe. The feed tray cover is then lifted, the remaining belt (if any) is forced out of the feed tray, the feed tray is lifted to inspect the rear of the barrel and the face of the bolt. Any links or copper boxes are removed. The weapon is now clean.
In the rare case there is a live round on the face of the bolt, it is loosened with a cleaning rod or other hard object. If a live cycle is installed in the barrel, the operator must quickly determine whether the barrel is hot enough to give cooking a chance. If he is, immediately move your face away from the opening of the weapon. He must wait for the barrel to cool before attempting to remove it. In most cases, attempting to remove the barrel would result in an explosion as soon as the barrel was opened in the receiver. The operator may also attempt to eject the round by removing the weapon from the safe position, pulling the trigger, and retracting the charging handle. This has a good chance of detonating the weapon, so care must be taken to ensure that the weapon is in a safe position first.
M192 Lightweight Ground Mount
The M240B is a standard machine gun for the US infantry. The military is also in the U.S. The type used by Air Force, US Navy and US Coast Guard. It comes ready to fight on the ground. Verbally it is almost always called "M240 Bravo" or "240 Bravo", but is often written as M240B. America. Since 2014 the Marine Corps has switched to the M240B.
The M240D is a variant of the M240, with two possible configurations: aircraft and exhaust (ground). The modified aircraft for the M240D have a front and rear sight and a trigger group that allows for a spade grip device. Ground configuration includes installation of an egress package or "baby conversion kit", designed to provide landed aircrew with additional firepower. The M240D is an improvement over the M240E1, primarily in the inclusion of a light rail on the receiver cover. The M240E1 was also fitted with a spade grip for ease of use.
The M240G (pronounced "240 Golf"), a standard U.S. There was a machine gun. Marine Corps. The Marine Corps replaced the M60E3 with the M240G. The M240 allows for uniformity throughout the Marine Corps whether the weapon is used in an infantry, vehicular, or airborne role. The M240G is a ground variant of the original M240 or M240E1, a 7.62 mm medium caliber weapon designed as a coaxial/pintle mounted machine gun for tanks and LAVs. The M240G can be converted for use on the ground by installing a "kiddie conversion kit," (flash suppressor, front sight, barrel handle, buttstock, kiddie-length rifle, bipod, and rear assembly). The 240G has no front heat shield, and is a few pounds lighter than the M240B at 25.6 pounds. The Marine Corps has switched to the M240B.
An upgrade to the M240D, the M240H (sometimes called the "240 Hotel") has been modified for quick conversion to infantry standard using a rail-mounted feed cover, an improved flash suppressor, and egress kit. ,
The General Purpose Machine Gun: The Do It All Gun
The M240L is a lighter version of the M240B. It has a shorter barrel (four inches shorter) than the M240B and combines titanium construction with other manufacturing methods to produce lighter parts. The M240L is about 5.5 pounds lighter than the M240B. "M240" redirects here. For Israeli Jeep derivatives, see AIL Storm. For the Leica M 240 camera, see Leica M (Typ 240). For the Russian mortar, see 240 mm M240 mortar.
M240 - officially machine gun, 7.62 mm, M240 - US military designation. of FN Mag,
The M240 has been used by the United States Armed Forces since the late 1970s. It is used primarily by infantry, often in artillery companies, and by submarines, seaplanes, and airships. Although it is heavier than other similar weapons, it is considered more reliable and its standardization among NATO members is a major advantage.
All models are fed from a deployable belt and are capable of firing most types of 7.62 mm (.30/.308 cal) NATO ammunition. Variants of the M240 can be modified to use a non-detachable belt. There are significant differences in weight and other features between the other versions that limit the interchangeability of parts. M240s are used by the US military. They are manufactured by FN America, an American subsidiary of the Belgian company FN Herstal.
M240 Lima Lightweight Machine Gun Us Military Infantry\
The M240B and M240G are often fired from an integrated bipod, tripod, or vehicle mount; With regard to the use of a tripod, the U.S. The Army primarily uses the M192 Lightweight Ground Mount, while the U.S. The Marine Corps uses the M122A1 tripod, a slightly modified M2 tripod.
This section requires additional citations for verification. Please help improve this article by adding citations from reliable sources. Items that do not work can be challenged and removed. (Jan 2013 ) (Learn how and when to remove this template message)
Made by Fabrique Nationale d'Herstal, the FN MAG was chosen by
Shoot a machine gun, gun laser engraving machine, tattoo machine gun kit, machine gun kelly funko, gun massage machine, gun barrel drilling machine, las vegas machine gun, gun drilling machine, gun engraving machine, price gun machine, machine gun kelly tickets, machine gun kelly phoenix
0 Comments